How to Crochet a Bustier Top – Free Pattern

Hello, and welcome to yet ANOTHER free strappy crochet top pattern. This one is at least a bit different since it has bra/bustier cups that are rounded/circle-shaped. And you could even make a corset-like version as well. Depending on the size of the yarn you’re using you’ll need to adapt the tutorial but the instructions should be clear enough to help you do that easily. I decided to make it more complicated by doing leaf designs but you can just do the simple crochet stitches instead and your top will still turn out wonderfully. And always remember that you can reach me via the comments section, email, or Instagram dm if you have any questions.

Abbreviations

  • CH – chain
  • SS – slip stitch
  • SC – single crochet
  • HDC – half double crochet
  • DC – double crochet
  • DC3TOG – crochet 3 double crochet stitches together
  • YO – yarn over

You will need:

  1. 4mm and 3.5mm crochet hooks
  2. Approximately 60g of suitable yarn
  3. Tapestry needle

How to Actually Crochet a Bustier Top

How to Crochet the Bra Cups

For this section I used a 4.5mm crochet hook and the total amount of yarn I used for both cups was approximately 20g.

The Bottom Part of the Rounded Bra Cup

Row 1

Make a slip knot, then CH 3. Make 2 HDC in the 1st chain you made.

Row 2

Turn your work, CH 1, then make 2 HDC in both of the stitches.

Row 3

Turn your work, CH 1, then make 2 HDC in the 1st stitch, then 1 HDC in each of the following 2 stitches, then 2 HDC in the last stitch.

Rows 4-6

Turn your work, CH 1, then make 2 HDC in the 1st stitch, then 1 HDC in each of the following stitches, then 2 HDC in the last stitch. Repeat these rows as many or as little times as you need so that the cup fits you, always doing 2 HDC at the beginning and end of the rows. You must repeat these increasing rows until the bottom part is as wide as you want.

Rows 7-11

Turn your work, CH 1, then make a HDC in each of the stitches of the row. Repeat as many or as little times as you need so that the cup fits you. Remember you still have the decreasing rows to crochet.

Rows 12-16

Turn your work, CH 1, then make a HDC2TOG in the 1st 2 stitches. Make 1 HDC in each of the following stitches but do a HDC2TOG in the last 2 stitches. Repeat these decreasing stitches until you have a row of 4 stitches.

Last 2 Rows

Turn your work, CH 1, then make 2 HDC2TOG. Turn your work, CH 1, then make 1 HDC2TOG.

How to Crochet the Top Part of the Rounded Bra Cup

Now CH 2 then make a row of HDC perpendicular along the curved sides of the diamond shape you just made. Make as many or as little rows as you want. Just try on the bra cup so you know it fits. I did 4 rows of HDC for this part. Repeat all the steps so you have 2 bra cups for your bustier top.

How to Crochet the Middle Section of the Bustier Top

For this part I used a 4mm crochet hook and the total amount of yarn I used was approximately 5g.

Variation 1 of the Middle Section of the Bustier Top

This variation is a wider middle section and is pretty simple since it just has DC stitches.

Row 1

Make 5 CH. Then, starting in the 3rd chain from your hook, make 1 DC in each of the 2 following stitches, and then 2 DC in the last stitch. (5 stitches total)

Row 2

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 3 stitches, and 2 DC in the last stitch. (7 stitches total)

Row 3

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 5 stitches, and 2 DC in the last stitch. (9 stitches total)

Row 4

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 7 stitches, and 2 DC in the last stitch. (11 stitches total)

Row 5

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 9 stitches, and 2 DC in the last stitch. (13 stitches total)

Row 6

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 11 stitches, and 2 DC in the last stitch. (15 stitches total)

Row 7

CH 2, then make 2 DC in the 1st stitch, 1 DC in each of the following 13 stitches, and 2 DC in the last stitch. (17 stitches total)

If you need this middle section to be longer you can simply continue increasing the stitches at the beginning and end of every row until it fits your bra cups like in the image below.

Variation 2 of the Middle Section of the Bustier Top

This variation will ensure that your bra cups are almost touching. In the 3rd row I begin a leaf design but you can simply do DCs for the entire section, just making sure to increase at the beginning and end of each row until your desired width is achieved then you can just carry on with regular rows of DCs until your desired length is achieved.

Row 1

CH 3, then make 2 DC in the 1st chain you made.

Row 2

CH 2, then make 2 DC in both stitches. (4 stitches total)

Row 3

CH 2, then make 2 DC in the 1st stitch, 1 DC in the next stitch, CH 1, another DC in the next stitch, and 2 DC in the last stitch. (7 stitches total)

Row 4

CH 2, then make 2 DC in the 1st stitch, CH 1, skip 2 stitches and make 3 DC in the chain space from Row 2, CH 1 again and skip 2 stitches, then 2 DC in the last stitch. (9 stitches total)

Row 5

CH 2, then make 2 DC in the 1st stitch, 1 DC, 1 CH, skip 1 stitch then 3 DC in each of the following stitches, 1 CH, skip 1 stitch then 1 DC, then 2 DC in the last stitch. (11 stitches total)

Row 6

CH 2, then make 2 DC in the 1st stitch, 2 DC, skip 2 stitches then DC3TOG, skip 2 stitches again, 2 DC, and then 2 DC in the last stitch. (13 stitches total)

Row 7

CH 2, then make 2 DC in the 1st stitch, CH 1, skip 2 stitches, make 3 DC in 1 stitch, CH 1, skip 2 stitches, 1 DC, skip 2 stitches, make 3 DC in 1 stitch, CH 1, skip 2 stitches, and then make 2 DC in the last stitch. (15 stitches total)

Row 8

CH 2, then make 2 DC, CH 1, skip 1 stitch, make 3 DC, CH 1, skip 1 stitch, make 1 DC, skip 1 stitch, CH 1, make 3 DC, skip 1 stitch, CH 1, then 2 DC. (15 stitches total)

How to Crochet the Upper Side Sections of the Bustier Top

For these sections I used a 4mm hook and 2 strands of thin yarn. Make your starting chains more or less depending on your body and style preference. But still follow the basic steps to get the shape of these sections right.

Row 1

Make 17 CH, then make a row of DC starting in thee 3rd chain from your hook. Make 2 DC in the last stitch of the row. (16 stitches total)

Row 2

CH 2, then make 2 DC in the 1st stitch. For the rest of the row just do DCs. (17 stitches total)

Row 3

CH 2, then make 16 DC, ending with 2 DC in the last stitch of the row. (18 stitches total)

Row 4

CH 2, then make 2 DC in the 1st stitch. For the rest of the row just do 17 DC. (19 stitches total)

Row 5

CH 2, then make 18 DC, ending with 2 DC in the last stitch of the row. (20 stitches total)

Row 6

CH 2, then make 2 DC in the 1st stitch. For the rest of the row just do 19 DC. (21 stitches total)

Row 7

CH 2, then make 20 DC, ending with 2 DC in the last stitch of the row. (22 stitches total)

If you’re satisfied with the length of this section simply CH 1 then leave a tail of yarn to weave it later. Otherwise you can continue increasing stitches on 1 side until you’re happy.

Repeat all the steps to make the other upper side section for your crochet bustier top.

How to Crochet the Lower Side Section of the Bustier Top

For this section I used the 3.5mm hook. If you prefer a simpler design without the leaf pattern simply make enough chains for your desired width and then make rows of DC until you reach the desired length.

Row 1

Make 19 CH, then make 2 DC starting in the 3rd chain from your crochet hook. CH 1, skip 2 chains, then make 3 DC in the next chain, *CH 1, skip 3 chains, make another 3 DC in the next chain. Repeat from the * 1 more time then CH 1, skip 2 stitches, and make 2 DC.

Row 2

CH 2, then make 2 DC, *CH 1, skip 1, then make 3 DC. Repeat from the * twice more, then CH 1, skip 1, and make 2 DC.

Row 3

CH 2, make 2 DC, CH 2, skip 1, then make DC3TOG. *CH 3, skip 1, crochet DC3TOG, repeat from the * once more. Then CH 2, skip 1, and make 2 DC.

Row 4

CH 2, make 4 DC, CH 1, skip 2, make 3 DC in the next stitch, CH 1, skip 3, make 3 DC in the next stitch, then CH 1, skip 2, and make 4 DC.

Row 5

CH 2, make 4 DC, *CH 1, skip 1, then make 3 DC. Repeat from the * once more. Then CH 1, skip 1, and make 4 DC.

Row 6

CH 2, make 4 DC, CH 2, skip 1, then crochet DC3TOG, CH 3, skip 1, crochet DC3TOG, CH 2, skip 1, and then make 4 DC.

Repeat Rows 1-6 until you have achieved your desired length.

RHow to Crochet the Back of the Bustier Top

For this section I used a 3.5mm crochet hook

How to Crochet the Leaf Trim on the Bra Cups

For this section I used a 3.5mm crochet hook

How to Join all the Sections of the Crochet Bustier Top Together

For this part I used a 3mm crochet hook.

How to Crochet the Straps

More Free Fairycore Crochet Patterns

For those who need more fairycore inspired crochet projects to do, I have a variety of free patterns for clothes and accessories such as:

Premium Fairycore Crochet Pattern

Carry a spring flower everywhere you go with my Crochet Flower Tote Bag, and you are more than welcome to sell the bags you crochet with this pattern, provided you credit me as the designer please.

flower shaped crochet handbag in pink and white. Downloadable crochet pattern pdf

DIY not AI

If you are sick and tired of being bamboozled by those too perfect AI images and want some inspiration from actual human beings, my Pinterest board, DIY NOT AI, awaits. This is the link, AKA magical portal, that will take you there. DIY NOT AI is also a group board that is OPEN TO CONTRIBUTORS!!! Whether you’re a crocheter, seamstress, knitter, or any other kind of DIY/handicraft creator this is The Place for you to promote your work to people who appreciate REAL quality over quantity. So what are you waiting for? Shoot me a dm on Pinterest to be added!

And that’s all for today folks! If you have any questions please comment below and I, or perhaps a kind internet stranger, will assist you.

Lots of love & light,

Maria

Leave a Comment

Scroll to Top